Propiedades :

  • Dimensions
  • CHEMICAL COMPOSITION
  • MECHANICAL PROPERTIES
  • QUALITY STANDARDS
Quality Thickness (mm) Measures Width x Length
(mm x mm)
Theoretical Weight
kg/m2 kg/lámina
A-569 2,00 1.000 X 2.000 16,000 32,000
1.200 X 2.400 16,000 46,080
2,25 1.000 X 2.000 18,000 36,000
1.200 X 2.400 18,000 51,840
2,50 1.000 X 2.000 20,000 40,000
1.200 X 2.400 20,000 57,600
3,00 1.000 X 2.000 24,000 48,000
1.200 X 2.400 24,000 69,120
3,50 1.000 X 2.000 28,000 56,000
1.200 X 2.400 28,000 80,640
4,00 1.000 X 2.000 32,000 64,000
1.200 X 2.400 32,000 92,160
4,50 1.000 X 2.000 36,000 72,000
1.200 X 2.400 36,000 103,680
5,00 1.000 X 2.000 40,000 80,000
1.200 X 2.400 40,000 115,200
6,00 1.000 X 2.000 48,000 96,000
1.200 X 2.400 48,000 138,240
8,00 1.000 X 2.000 64,000 128,000
1.200 X 2.400 64,000 184,320
9,00 1.000 X 2.000 72,000 144,000
1.200 X 2.400 72,000 207,360
10,00 1.000 X 2.000 80,000 160,000
1.200 X 2.400 80,000 230,400
12,00 1.000 X 2.000 96,000 192,000
1.200 X 2.400 96,000 276,480
ASTM A36 2,0 1.000 x 2.000 16.000 32.000
1.200 x 2.400 16.000 46.080
2,25 1.000 x 2.000 18.000 36.000
1.200 x 2.400 18.000 51.840
2,50 1.000 x 2.000 20.000 40.000
1.200 x 2.400 20.000 57.600
2,75 1.000 x 2.000 22.000 44.000
1.200 x 2.400 22.000 63.360
3,00 1.000 x 2.000 24.000 48.000
1.200 x 2.400 24.000 69.120
3,50 1.000 x 2.000 28.000 56.000
1.200 x 2.400 28.000 80.640
4,00 1.000 x 2.000 32.000 64.000
1.200 x 2.400 32.000 92.160
4,1 1.200 x 2.400 32,800 94,460
4,50 1.000 x 2.000 36.000 72.000
1.200 x 2.400 36.000 103.680
5,00 1.000 x 2.000 40.000 80.000
1.200 x 2.400 40.000 115.200
6,00 1.000 x 2.000 48.000 96.000
1.200 x 2.400 48.000 138.240
8,00 1.000 x 2.000 64.000 128.000
1.200 x 2.400 64.000 184.320
9,00 1.000 x 2.000 72.000 144.000
1.200 x 2.400 72.000 207.360
10,00 1.000 x 2.000 80.000 160.000
1.200 x 2.400 80.000 230.400
12,00 1.000 x 2.000 96.000 192.000
1.200 x 2.400 96.000 276.480
DYA A569 2,50 1.200 X 2.400 20.125 57.960
2,75 1.200 X 2.400 22.138 63.757
3,00 1.200 X 2.400 24.150 69.552
3,50 1.200 X 2.400 28.175 81.144
4,50 1.200 X 2.400 36.225 104.328
5,00 1.200 X 2.400 40.250 115.920

 

Original coils with a weight of 16 to 20 tons

We offer our Service Center:

  • Coils reduced to required weight.
  • Straps in rolls, minimum width of 38 mm.
  • Sheets in widths and lengths required.
  • Other requirements per order, please consult.
CHEMICAL ANALYSIS (%) MAXIMUM VALUES
Rule C Mn P S Si Cu Ni Cr Mo V Ti Nb Al B
A-569 0,13 0,6 0,02 0,025 0,15 0,2 0,1 0,15 0,04 0,02 0,02 0,02 0,08
A-36 0,15 0,7 0,02 0,02 0,3 0,15 0,15 0,15 0,04 0,04 0,02 0,04 0,08
Rule Efforts (Mpa) A%
Fluencia Máximo
A-569
A-36 250 mín 450 a 550 23 mín
Rule Description and Uses
Commercial Quality
ASTM A-366
This specification covers carbon steel coils and sheets,
Commercial quality cold rolled. This material is recommended
for both exposed and protected pieces, where prints and
Moderate deformations in addition to welds can be involved.
ASTM A – 569 This specification covers coils and cut sheets of steel,
with low carbon content less than 15%, hot rolled
commercial quality This material is used in pieces where they can be
involved bending, stamping and deformation process.
Stamped Quality
ASTM A-619
This specification covers carbon steel coils and sheets,
cold rolled quality stamping. It is recommended in the
manufacture of pieces where deformations and severe prints
(deep sausage) are present.
ASTM A-620 This specification covers carbon steel coils and sheets,
quality cold rolled Stamping, special calming.
It is recommended in the manufacture of pieces where deformations and
particularly severe prints (extra deep sausage), or where
a surface free of wrinkles is required.
ASTM A-621 This specification covers bonines and carbon steel sheets,
hot rolled quality stamping. It is recommended in the
manufacture of pieces where deformations and severe prints
(deep sausage) and where the superficial appearance is not paramount.
ASTM -622 This specification covers carbon steel coils and sheets,
Hot rolled quality Stamping, special calming.
It is recommended in the manufacture of pieces where deformations and
particularly severe prints (extra deep sausage).
Structural Quality
ASTM A-36
This specification covers steel profiles, sheets and bars
carbon structural quality to be welded, riveted or
bolted in the construction of bridges and buildings, and for
structural purposes.
ASTM A-283 GRADE C This specification covers quality carbon steel sheets
structural for general applications.
ASTM A-572 GRADE 50 This specification covers high strength structural steels
and low cobaltovanadium alloy, recommended for construction
riveted, bolted or welded bridges, buildings and other
structures.
Naval Quality
ASTM A-131 GRADE A
This specification covers profiles, sheets, bars and rivets
mostly used for naval constructions.
Quality for Pressure Vessels
ASTM A-516 B GRADE 70
This specification covers carbon steel sheets for the
manufacture of welded containers, which must work under pressure and
where a good tenacity is important.