Propiedades :

  • Dimensions
  • CHEMICAL COMPOSITION
  • MECHANICAL PROPERTIES
  • QUALITY STANDARDS
Quality Thickness (mm) Medidas Ancho x Largo
(mm x mm)
Theoretical Weight
kg/m2 kg / sheet
A569 2,50 1,000 x 2,400 20,675 49,62
2,80 1,000 x 2,400 23,156 55,574
3,00 1.000 x 2.400 24,810 59,544
1.200 x 2.400 24,810 71,453
4,10 1.000 x 2.400 33,907 81,377
1.200 x 2.400 33,907 97,625
4,50 1.000 x 2.400 37,215 89,316
1.200 x 2.400 37,215 107,179
5,00 1.000 x 2.400 41,35 99,24
1.200 x 2.400 41,35 119,088
6,00 1.000 x 2.400 49,620 119,088
1.200 x 2.400 49,620 142,906

Original coils with weight up to 20 tons.

CHEMICAL ANALYSIS (%) MAXIMUM VALUES
Rule C Mn P S Si Cu Ni Cr Mo V Ti Nb Al B
A-569 0,13 0,6 0,02 0,025 0,15 0,2 0,1 0,15 0,04 0,02 0,02 0,02 0,08
Rule Efforts (Mpa) A%
Fluence Maximum
A-569
Rule Description and Uses
Commercial Quality
ASTM A-366
This specification covers carbon steel coils and sheets,
Commercial quality cold rolled. This material is recommended
for both exposed and protected pieces, where prints and
Moderate deformations in addition to welds can be involved.
ASTM A – 569 This specification covers coils and cut sheets of steel,
with low carbon content less than 15%, hot rolled
commercial quality This material is used in pieces where they can be
involved bending, stamping and deformation process.
Stamped Quality
ASTM A-619
This specification covers carbon steel coils and sheets,
cold rolled quality stamping. It is recommended in the
manufacture of pieces where deformations and severe prints
(deep sausage) are present.
ASTM A-620 This specification covers carbon steel coils and sheets,
quality cold rolled Stamping, special calming.
It is recommended in the manufacture of pieces where deformations and
particularly severe prints (extra deep sausage), or where
a surface free of wrinkles is required.
ASTM A-621 This specification covers bonines and carbon steel sheets,
hot rolled quality stamping. It is recommended in the
manufacture of pieces where deformations and severe prints
(deep sausage) and where the superficial appearance is not paramount.
ASTM -622 This specification covers carbon steel coils and sheets,
Hot rolled quality Stamping, special calming.
It is recommended in the manufacture of pieces where deformations and
particularly severe prints (extra deep sausage).
Structural Quality
ASTM A-36
This specification covers steel profiles, sheets and bars
carbon structural quality to be welded, riveted or
bolted in the construction of bridges and buildings, and for
structural purposes.
ASTM A-283 GRADE C This specification covers quality carbon steel sheets
structural for general applications.
ASTM A-572 GRADE 50 This specification covers high strength structural steels
and low cobaltovanadium alloy, recommended for construction
riveted, bolted or welded bridges, buildings and other
structures.
Naval Quality
ASTM A-131 GRADE A
This specification covers profiles, sheets, bars and rivets
mostly used for naval constructions.
Quality for Pressure Vessels
ASTM A-516 B GRADE 70
This specification covers carbon steel sheets for the
manufacture of welded containers, which must work under pressure and
where a good tenacity is important.