Propiedades :

  • Dimensions
  • Mechanical Properties
  • CHEMICAL COMPOSITION
L Dimensions (mm) Area Weight Distance of the axes with respect to the axes
x-x=y-y E-E n-n
e cm w cm v1 cm v2 cm Ix cm4 Sx cm3 Rx cm Ie cm4 Re cm In cm4 Rn cm3 Sn cm
a s r1 r2 cm2 Kg./m
20×3 20 3.0 3.5 2.0 1.12 0.88 0.60 1.41 0.85 0.70 0.39 0.28 0.59 0.62 0.74 0.15 0.18 0.37
25×3 25 3.0 3.5 2.0 1.42 1.11 0.73 1.77 1.03 0.87 0.80 0.45 0.75 1.27 0.95 0.31 0.30 0.47
30×3 30 3.0 5.0 2.5 1.74 1.36 0.84 2.12 1.18 1.04 1.40 0.65 0.90 2.24 1.14 0.57 0.48 0.57
35x 4 35 4.0 5.0 2.5 2.67 2.09 1.00 2.47 1.41 1.24 2.95 1.18 1.05 4.68 1.33 1.24 0.88 0.68
6 6.0 3.87 3.04 1.08 1.53 1.27 4.13 1.71 1.04 6.50 1.30 1.77 1.16 0.68
40x 4 40 4.0 6.0 3.0 3.08 2.42 1.12 2.83 1.58 1.40 4.47 1.55 1.21 7.08 1.52 1.86 1.18 0.78
6 6.0 4.48 3.52 1.20 1.70 1.43 6.31 2.26 1.19 9.98 1.49 2.67 1.57 0.77
50x 4 50 4.0 7.0 3.5 3.89 3.06 1.36 3.54 1.92 1.75 8.97 2.46 1.52 14.20 1.91 3.73 1.94 0.98
5 5.0 4.80 3.77 1.40 1.98 1.76 11.00 3.05 1.51 17.40 1.90 4.59 2.32 0.98
7 7.0 6.56 5.15 1.49 2.11 1.78 14.60 4.15 1.49 23.10 1.88 6.02 2.85 0.96
65x 5 65 5.0 9.0 4.5 6.36 4.99 1.75 4.60 2.49 2.28 25.00 5.27 1.98 39.91 2.53 10.00 4.00 1.27
6 6.0 7.53 5.91 1.80 2.55 2.28 29.20 6.21 1.97 46.30 2.48 12.10 4.74 1.27
7 7.0 8.70 6.83 1.85 2.62 2.29 33.40 7.18 1.96 53.0 2.47 13.80 5.27 1.26
75x 7 75 7.0 10.0 5.0 10.10 7.94 2.09 5.30 2.95 2.63 52.3 9.67 2.27 83.60 2.88 21.10 7.15 1.45
8 8.0 11.50 9.00 2.13 3.01 2.65 58.90 11.00 2.27 93.30 2.85 24.40 8.11 1.46
90×7 90 7.0 11.0 5.5 12.24 9.61 2.45 6.36 3.46 3.17 92.50 14.10 2.75 147.0 3.46 38.00 11.00 1.77
100x 8 100 8.0 12.0 6.0 15.50 12.20 2.74 7.07 3.87 3.52 145.00 19.90 3.06 230.0 3.85 59.90 15.50 1.96
10 10.0 19.20 15.00 2.82 3.99 3.54 177.00 24.60 3.04 280.0 3.82 73.30 18.40 1.95
120X 10 120 10 13.0 6.5 23.20 18.20 3.31 8.49 4.69 4.22 313 36.00 3.67 497 4.63 129 27.50 2.36
12 12 27.50 21.60 3.40 4.80 4.26 368 42.70 3.65 584 4.60 152 31.60 2.35
150X12 150 12 16.0 8.0 34.80 27.30 4.12 10.60 5.83 5.29 737 67.70 4.60 1170 5.80 303 52.00 2.95
Quality Cedence Point Fy Kg / cm2 Max effort F Min Kg / cm2 Elongation% 50 mm
1-AE-25 2500 3700 25
2-AE-25 3500 5500 22
3-ASTM A 36 2500 4100/5600 20
4- ASTM A 572, GRADO 50 3500 4500 21
5- ST 37 -2 2400 3700/4500 25
6-ST 50-3 3600 5200/6200 22

 

 

 
Standard grade COVENIN ASTM Equivalent Degree Transfer Point Y (mim) Rupture Point Fu (mim) Elongation (%)
AE-25 A-36 2.500 KG./CM2 3.700 Kg/cm2 21
AE-35 A-50 3.500 KG./CM2 5.200 Kg./cm2 18

Source: Sidor / Sidetur

Quality % C (MAX) % Mn (MAX) % P (MAX) % S (MAX)
1-AE-25 0.20 0.80 0.05 0.05
2-AE-35 0.30 0.90 0.05 0.05
3-ASTM A 36 0.25 0.04 0.05
4- ASTM A 572, GRADE 50 0.23 1.35 0.04 0.05
5- ST 37 -2 0.20 0.06 0.05
6-ST 50-3 0.20 0.05 0.05

 

Editar
C % Mn % Si % S (máx.) %1 P (máx.)
0.12 – 0.20 0.60 – 0.80 0.15 – 0.25 0.05 0.05