Standard trusses have constant characteristics, except for their height, weight and diagonal angle.
Diameter Wire Superior (d3): 7.0 mm. (Flat surface)
Diagonal Wire Diameter (d2): 4.5 mm. (Flat surface)
Lower diameter (d1): 5.0 mm. (Grooved surface)
Zig-zag pass (a): 20 cm. Separation between lower wires (b): 6 cm.
|Type||Height (h) (cm)||Diagonal angles (º)||Weight (Kg/m)||Length (m)|
|C – 8||8||40.5||0.951||From 2 to 12 m. with increments of 10 cm|
|C – 10||10||46.4||0.973|
|C – 15||15||57.7||1.077|
|C – 20||20||64.6||1.194|
Special trusses are supplied upon request, thus satisfying the particular needs of the project and within the following range:
Height (h): From 7 to 30 cm with increments of 1 cm.
Length: From 2 to 12 cm with increments of 10 cm.
Zig-zag step (a): 20 cm.
Separation between lower wires (b): 6 cm
|Diameter of Wires|
|Superior (d3)||Diagonal (d2)||Lower (d1)|
|From 6.0 mm to 10.5 mm with increments of 0.5 mm (smooth or grooved surface)||From 4.5 mm to 6.0 mm with increments of 0.5 mm (smooth surface)||From 5.0 mm to 10.5 mm in increments of 0.5 mm (smooth or grooved surface)|
It is supplied on request