Propiedades :

  • Dimensions
  • TECHNICAL CHARACTERISTICS

Covenin 941-76

Caliber Thickness (mm) Width (mt) Largo (mt) Weight / piece (Kg)
26 0.45 1.000 2.000 7.611
1.219 2.440 11.143
24 0.60 1.000 2.000 10.026
1.219 2.440 14.678
22 0.70 1.000 2.000 11.636
1.219 2.440 17.035
20 0.90 1.000 2.000 14.856
1.219 2.440 21.749
18 1.20 1.000 2.000 19.686
1.219 2.440 28.820
16 1.50 1.000 2.000 24.516
1.219 2.440 35.905
14 1.80 1.000 2.000 30.956
1.219 2.440 45.320

Galvanized coating: G-60, others previous request.

Characteristics Normal Condition Special Condition
Base Steel Type SAE 1006 Previous Consultation
Quality standards A-924 / A-653 Commercial Quality JIS – G3302 COVENIN 941-76 A-653 Quality Lock Forming Embossing and Structural Consultation
Hardness 55 Rockwell B, to 65 Rockwell B From 55 Rockwell B (annealed), up to 90 Rockwell B
Galvanized weight 183 gr / m2 0.60 oz / ft2 layer G-60 152.50 gr / m2 G-50 274.50 gr / m2 G-90 381.25 gr / m2 G-125 610.00 gr / m2 G-200
Type of Galvanized Regular Grain (Regular Spangle) From mini grain to large grain
Surface Condition Chrome plated Without chroming, oiled SKIN PASS (coils) anchoring and painting (sheets)
Coil Weight 3 to 10 Tons According to customer’s requirement
Coil Width 700 to 1220 mm After consulting, from 650 mm
Internal diameter 508 mm
Sheet Length 2.00 – 2.44 m Special lengths and widths available after consultation
Bulk weight 2.500 Kg According to customer requirements